Hold-Down Lugs

Design Tanks provides hold-down lugs to tie down tanks for varying conditions, wind loads and seismic requirements

HOLD-DOWN LUGS—LIGHT DUTY
Designed to provide stability for fiberglass tanks 48” diameter and smaller.

• Available in 304 and 316 stainless steel for more corrosive environments.
• Lugs are bonded permanently to tank wall and are intended to be bolted onto a concrete mounting pad. Anchor bolts should be located after tank has been placed on pad (bolts not included).

HOLD DOWN LUGS—HEAVY DUTY
Designed for use with tanks 60” diameter or larger where there are seismic, mixing, or wind loading concerns.

• Available in 304 and 316 stainless steel.
• Lug can be ordered with or without holes. Lugs without holes are secured by steel clamps.

HOLD-DOWN LUGS—6,000-POUND
This galvanized hold-down lug is designed for heavier-duty tie-downs when high wind loads or seismic restraints are required.

FIBERGLASS HOLD DOWN LUGS—HEAVY DUTY
Designed for use in highly corrosive environments where there are mixing or wind load concerns.

• Secured to pad by clamps. Clamp anchoring bolts should be located after tank is mounted on pad (bolts not included). 
• Lug is bonded permanently to tank sidewall with laminate equal to or greater than tank wall thickness.

LOAD LEDGES
Fiberglass load ledges are attached to larger-diameter tanks when wind loads or seismic restraints are required. Galvanized hold-down restraints are included with this option.